Areca 1200 PCI-Express1 - 2x sATA II RAID (0, 1, JBOD)

zvětšit obrázek

Koupit na splátky? Jednoduše...
Dnes zaplatíte jen 413,- Kč
a zbytek v 10 splátkách po 413,- Kč

Výrobce	ARECA
Kód	5000873
Part no.	ARC-1200
Dostupnost zboží	SKLADEM na prodejně nebo v logistickém centru
Přidat do košíku
Běžná cena	3.750,- Kč bez DPH
Vaše cena při objednání přes eshop	3.435,- Kč bez DPH
Vaše cena při objednání přes eshop	4.122,- Kč vč. DPH Sleva: 8%
Máte dotaz? Zeptejte se prodavače... Zboží si chci objednat, kdy bude doručeno?

Popis produktu
Part No.: ARC-1200
Název: Areca 1200 PCI-Express1 - 2x sATA II RAID (0, 1, JBOD)
Popis: The Areca ARC-1200SATA RAID host adapter is a PCI-Express x1 bus to SATA Disk Array host adapter. It provides two SATA ll ports on a single controller. It is used the same RAID kernel of its field-proven external RAID controller. When properly configured, the SATA RAID adapter can provide a high degree of performance and fault tolerance with data mirroring for maximum protection. The ARC-1200 is the industry's most compelling PCIe x1 to SATA ll RAID solution which economically delivers full-featured true hardware RAID to desktop and workstations as well as entry-level servers.

Areca PCIe x1 RAID Card Comparison
Model Name
ARC-1200
Host Bus Type
PCIe x1
RAID Level Support
0, 1, Single Disk and JBOD
Cache Memory
on-board
Driver Support
2*SATA ll
Internal Disk Connector
SATA
External Disk Connector
N/A
Lan Port
N/A

For the products photo link: http://www.areca.com.tw/support/photo_gallery.htm

Architecture

500MHz Storage processor
PCIe x1 bus
DDR2 400 SDRAM
Write-through or write-back cache support
Support up to 2 SATA ll drives
Multi-adapter support for large storage requirements
BIOS boot support for greater fault tolerance
BIOS PnP (plug and play) and BBS (BIOS boot specification)
support
NVRAM for RAID configuration & transaction log
Redundant flash image for adapter availability
RoHS Compliant

RAID Features
RAID level 0, 1, Single Disk and JBOD
Multiple RAID selection
Array roaming
Online RAID level/stripe size migration
Online capacity expansion and RAID level migration simultaneously
Instant availability
Automatic drive insertion / removal detection and rebuilding
Greater than 2TB per volume set (64-bit LBA support)
SMART disk drive monitoring for reliability

Monitors/Indicators

System status indication through HDD activity/fault connector, and alarm buzzer

SMTP support email notification
SNMP support for remote notification
I2C Enclosure management ready

RAID Management
Field-upgradeable firmware in flash ROM
In-Band Manager
Web browser-based McRAID Storage manager via Http Proxy Server for Windows, Linux and FreeBSD system
Hot key “boot-up” McBIOS RAID manager via BIOS
Support Command Line Interface (CLI)
Support controller's API library for customer to write its own AP
Single Admin Portal (SAP) monitor utility
HDD Stress Test (HST) utility for production
Out-of-Band Manager
Push Button and LCD display panel

Operating System
Windows Vista/Server 2003/XP/2000
RedHat Linux
SuSE Linux
FreeBSD
Novell Netware 6.5
Solaris 10/11 x86/x86_64
Mac OS 10.4/10.5 (EFI BIOS support)

Environmental/Physical
Mechanical

Form Factor: PCI Half Length/ Low Profile
Dimension: 64(H) x 168(L) mm
SATA Interface: 2 Discrete SATA Latch Connector
I/O Interface

(2x1) header for fault LED connector
(2x1) header for activity LED connector
(2x4) header for LCD & enclosure management connector

Environmental Specifications

Operating: Temperature:+5°c to +50°c
Humidity: 15-80%
non-condensing

Storage Temperature: Temperature:-40°c to 70°c
Humidity: 5-90%
non-condensing

Electrical

Power Requirements

PCIe x1
+3.3V

1.32W
+12V

3.6W

Parametry
Sběrnice	PCI-Express x1
Typ přídavné karty	Samostatný serialATAII RAID řadič

Zboží 9/17

Tento produkt byl přidán dne Pondělí 31. březen 2008.

Technické specifikace se mohou změnit bez výslovného upozornění. Obrázky mají pouze informativní charakter. Více informací získáte zde, nebo na webových stránkách výrobce.